SciELO - Scientific Electronic Library Online

 
vol.7 número3Identificación de dificultades de aprendizaje y de conducta en niños y niñas de 6 a 7 años de edad que acuden a una escuela pública, ubicada en el Barrio Julio Correa, Luque, Año 2019Calificación de riesgo crediticio en productores agrícolas en el Paraguay, año 2018 índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

  • No hay articulos citadosCitado por SciELO

Links relacionados

  • No hay articulos similaresSimilares en SciELO

Compartir


Revista Científica de la UCSA

versión On-line ISSN 2409-8752

Resumen

DA SILVA-ZARATE, J  y  NARVAEZ-BENITEZ, F. C.. Proposal to improve profitability through the optimization of processes in the assembly of base radio stations of the FAST SITE type, turnkey and placed of a company in the telecommunications sector. Rev. ciente. UCSA [online]. 2020, vol.7, n.3, pp.29-46. ISSN 2409-8752.  https://doi.org/10.18004/ucsa/2409-8752/2020.007.03.029.

The purpose of this research work was to give a proposal for improving profitability, having as a premise the optimization of processes in the assembly, specifically of three types of radio base stations: Fast site, turnkey and colocalized of a company in the telecommunications area, and thus avoid fines for delay of works, derived from the lack of availability of materials and considering that the current system of work does not allow quantifying the cost of assembly of the stations. The development of the research of descriptive scope consisted of the collection of information corresponding to técnica notebooks, investigations, the analysis of the industry starting from the data collection, as well as interviews to the engineering personnel of the industry. The study determined the absence of a minimum inventory of materials to ensure the continuity of the execution of the assembly of the radio base stations, this due to the fact that they did not have any control over the materials to be used, for that reason it was concluded that for the improvement of the profitability in the assembly a work method with a continuous flow must be established, with a minimum inventory of materials in deposit, the design of a standard list of materials required by each type of station and a method of measurement and control that allows the generation of information that serves as feedback to the entire set of processes that are part of the assembly of a radio base station of each type mentioned above.

Palabras clave : profitability; optimization; radio base stations; processes; assembly..

        · resumen en Español     · texto en Español     · Español ( pdf )